What it is magnitude and meaning of cone error readings given by Celestr...

In the hand control menu under Scope Setup, Mount Settings, your Celestron GoTo German equatorial mount displays Cone Value, which is set when one or more calibration stars are added...

What it is magnitude and meaning of cone error readings given by Celestr...

In the hand control menu under Scope Setup, Mount Settings, your Celestron GoTo German equatorial mount displays Cone Value, which is set when one or more calibration stars are added...

What battery type is used in the CGE mount for the real-time clock (RTC)?

This mount uses the CR2032 3-volt lithium battery for the RTC.Updated 12/3/13

What battery type is used in the CGE mount for the real-time clock (RTC)?

This mount uses the CR2032 3-volt lithium battery for the RTC.Updated 12/3/13

An extremely fine grayscale mesh appears on the screen when I'm using my...

This grid pattern is perfectly normal. It will only appear when using the Y800 codec in iCap. NexImage 5 uses a color sensor and the Y800 codec is for capturing...

An extremely fine grayscale mesh appears on the screen when I'm using my...

This grid pattern is perfectly normal. It will only appear when using the Y800 codec in iCap. NexImage 5 uses a color sensor and the Y800 codec is for capturing...

What are the differences between the CGEM and CGEM DX mounts?

The CGEM DX mount differs from the CGEM: 1) The CGEM DX has a 1-1/4” counterweight shaft versus ¾” and correspondingly bigger counterweights. 2) The CGEM DX has a heavier,...

What are the differences between the CGEM and CGEM DX mounts?

The CGEM DX mount differs from the CGEM: 1) The CGEM DX has a 1-1/4” counterweight shaft versus ¾” and correspondingly bigger counterweights. 2) The CGEM DX has a heavier,...

What is the wiring diagram for the Advanced GT’s dec cable?

The wiring is straight through or one-to-one. Blue, yellow, green-red, black-white. Updated 12/27/13

What is the wiring diagram for the Advanced GT’s dec cable?

The wiring is straight through or one-to-one. Blue, yellow, green-red, black-white. Updated 12/27/13

I get the message "the device Neximage 5 is in live mode but doesn't see...

You may see the following error message pop up when using NexImage 5 #93711 and iCap: If you do, please try the following remedies:  Adjust the resolution settings on the...

I get the message "the device Neximage 5 is in live mode but doesn't see...

You may see the following error message pop up when using NexImage 5 #93711 and iCap: If you do, please try the following remedies:  Adjust the resolution settings on the...